| BACK TO
TOP |
OnLine
PLC Course1 |
 |
INTRODUCTION TO PLC'S:
For Beginners who need to learn PLC 'S at an industrial level,
with tutor supportl.
This Introductory PLC course is ideal for anyone wishing to
expand their knowledge about PLC's and their use in Industries
worldwide. No previous experience is necessary.
FREE PLC software included, online videos, manuals and tutor
support.
Further Information and to BUY - click below:
Click
here - Online Introduction PLC Programming |
| |
OnLine PLC
Course2 |
|
PLC PROGRAMMING part1:
For Engineers Electrical and Mechanical who will be working
with PLC's.
Learn how to use a PLC when Fault Finding,
modifying programs and how to design control routines and
complete programs.
Additional free Learn Omron
PLC programming and
gain another skill, Addressing, Instructions, Timers and Counters,
Data Instructions.
Further Information and to BUY - click below:
Click
here - Online PLC Programming part1
|
| |
OnLine PLC
Course3 |
|
PLC PROGRAMMING part2:
For Engineers Electrical and Mechanical who will be working
with PLC's.
Continuing in our series, learn further
PLC instructions and how to implement them into working programs.
Learn Structured programming and how to maintain the safety
integrity of the process.
Further Information and to BUY - click below:
Click
here - Online PLC Programming part2
|
| |
Special Offer
- Course2 and Course3 |
|
PLC PROGRAMMING part1+2:
Buy both Part1 & Part2 and receive 5% Discount, Plus FREE
CD Trainer and Portfolio.
For Engineers Electrical and Mechanical who will be working
with PLC's. Learn how to use a PLC when Fault Finding, modifying
programs and how to design programs.
Further Information and to BUY - click below:
Click
here - Online PLC Programming part1+2
|
| |
OnLine PLC
Course4 |
|
PLC PROGRAMMING part3:
For Engineers Electrical and Mechanical who will be working
with PLC's.
Learn how advanced programming instructions
function. This course is extensive in creating Industrial
applications. The knowledge gained on this course will further
enhance your future career prospects in working with PLC's.
Further Information and to BUY - click below:
Click
here - Online PLC Programming part3
|
|
|
| |
|
|
PLC TRAINING
CD |
 |
NEW!
PLC Trainer Version3
Introduction to PLC'S
- TRAINING
CD
Learn anytime - anywhere
CD Pack - PLC Trainer for PLC Programming. Simulator, PLC
Programming Software and extensive PLC manuals, get your programs
working.
THE CD IS FREE WHEN YOU TAKE COURSES 2+3
Experience Required:
No previous knowledge or experience necessary
Description:
PLC TRAINER teaches
you the basics of PLC's and PLC Ladder Programming as used
in all types and makes of PLC's worldwide. You will learn
about Timers, Counters, Single Shot Pulse, Latches, Handling
Data, PLC Hardware etc. You will also learn how to use the
included Engineering PLC software to write your first program
shown on the CD, using ladder symbols to construct process
start/stop routines and alarm latches.
Also
included on the CD is a Free copy of Syswin 34 as
used for Omron PLC's, with this you can practice
writing PLC programs and if you have a CPM series PLC even
download your program into the PLC and monitor/ debug it.
Further
Information - click below:
PLC TRAINER
CD |
| |
FREE!
ADD-ON PLC TRAINING MODULES |
| |
NEW!
FOR 2008
For engineers wishing to expand their programming knowledge
for working with MITSUBISHI - OMRON - SIEMENS - ALLEN BRADLEY
PLC'S, with Tutor support.
Experience Required:
FREE! - Anyone
who has taken Scantime PLC OnLine Course above, contact your
Course Tutor for access.
Further Information - click
below:
Click here - SCANTIME ADD-ON PLC TRAINING MODULES |
| |
|
ONLINE
PLC COURSES INCLUDE:
YOUR PERSONAL INTERNET COURSE AREA - available to you 24/7
all year round
COURSE VIEWER - with audio commentary
FREE PLC Software for your PC Syswin34 -
WinXP/2000/NT/98
COURSE TUTOR - Professional
Engineer
COURSE
CERTIFICATE - Delivered via post
FULL
ACCESS TO PLC MANUALS & DATA - including
CxProgrammer guide, Siemens
Step7 etc
The software we provide allows you to practice writing
PLC Programs shown on the course.
Additional
to your ONLINE Course you will also receive: (PLC's &
Programming part1+2)
ENGINEERS
PLC COURSE PORTFOLIO AND COURSEWARE CD
Over 2000 pages course manuals, Courseware CD and Course Portfolio
when you take both
course PLC's & Programming Part1 & Part2
What some of our Students say on
our online courses:
Steve C UK - Dear Scantime,
I would just like to take the opportunity to express my gratitude
for all the support that you gave me during this course. With a
very big thanks to my course tutor.
I can't fault the way the course was set out and executed. Many
thanks from a satisfied student.
James USA - I see now and
it does make sense now that you have broke it down I follow you.Man
there really is a lot of things to take into consideration when
programming but I dont have to tell you that!
Steve UK - In a recent interview my answer to “Can
you read a logic table?” Had to be “No”. It goes
without saying that I didn’t get the job… so here I
am.
Jeff IRELAND - During 2004/2005
I enrolled with Scantime for two on-line courses. Having never done
this type of ‘learning’ in the past, I was somewhat
apprehensive in terms of what to expect. I need not have worried.
I found both the courses to be really interesting and extremely
useful. ( I still sometimes refer to my course notes, even now!).
My tutor, I found to be patient, professional, and extremely helpful
in nursing me through these two courses, but at the same time not
letting me off too lightly and making me think for myself. Also,
his response times to my many questions was always very prompt.
Back to Top
|
EMPLOYED
