An Introduction to HMI Programming with Siemens WinCC (TIA Portal)!

We're going to take a small step away from the PLC and take a look at the HMI! We'll show you how to setup an HMI inside of Siemens WinCC via TIA Portal as well as connect it to a PLC, create HMI Tags, assign objects to a screen and then test via the Simulator.

Timestamps:

02:30 - New Project and Hardware Configuration
04:25 - Devices and Network Connections
06:30 - HMI Device Configuration
06:55 - HMI Tags
10:00 - Creating a Basic Screen
12:00 - Adding Objects to Screen
14:20 - Setting up Tags on Buttons
16:35 - Changing State/Appearence of Screen Objects
18:10 - Testing HMI