Introduction to Profibus DP, Siemens Remote IO and Fault Finding on a Network using Diagnostics!

Introduction to Profibus DP, Siemens Remote IO and Fault Finding on a Network using Diagnostics!

Introduction to Profibus DP, Siemens Remote IO and Fault Finding on a Network using Diagnostics!


Today we're going to have a look at an Introduction to Profibus DP, Siemens Remote IO and Fault Finding on a Network using Diagnostics. We're going to show you how to setup a Profibus DP Network inside of STEP7 Professional, add a Siemens Remote IO Station, Change Addressing, Create Faults on the Network and then Diagnose though faults using Siemens Diagnostics.


Timestamps:

02:00 - In-Depth look at Profibus I/O Station
07:45 - Create New Project
08:25 - Hardware Configuration
11:05 - MPI Interface
12:35 - Clock Memeory
14:10 - Pulse Routine #1
15:55 - Setting up Profibus DP Network
18:55 - Remote I/O Station
22:06 - I/O Addressing
25:40 - Pulse Routine #2
27:45 - Hardware Diagnostics


Back to Tutorials
  • Our News